Alloy wheels factory with jjjwheel.com? Some businesses on the market do not need to promote the center of the modified hub of the ring, personally think that marketing gimmicks are greater than the actual effect. For hubs that require the use of a center ring, just use the appropriate size of the center ring. No problem at all in daily driving! Mistake : ignore the hub installation step, the hub is not properly installed. Many friends to change the wheel hub, wheel hub online shopping with very excited mood must not immediately drive to the store installation, expecting the wheels finally arrived and then install immediately without any inspection. Discover more details on custom alloy wheels.
The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.
The characteristics of high thermal conductivity of aluminum alloy wheels are extremely beneficial to the heat dissipation effect of the car tires due to high-speed driving, so that they are better than steel under the same conditions. It reduces the possibility of hot tires during long-distance high-speed driving, and significantly improves the safety performance of high-speed driving. It is easier to realize the “tubeless” of modern wheels. For a tubeless wheel, the original rubber inner tube is directly replaced by an aluminum rim. If a “puncture object” such as a nail is inserted into the outer wheel while driving, as long as it is not pulled out, it will not be removed. There will be an accident that the car rolls over due to a sudden flat tire like a tire with a tube. After a tubeless wheel encounters a “puncture object”, it can generally last for at least an hour or even longer, which is particularly important for the safety of cars driving on the highway.
We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating. Find even more details at jjjwheel.com.