Piston needle valve manufacturer and supplier today: We are committed to producing the best quality products at the most competitive prices. Therefore, we sincerely invite all interested companies to contact us for more information. Our objective is “good quality for survival, good faith for development, using new technology to improve product quality”. Our valves are produced to the highest quality standards with modern manufacturing technology and astute materials sourcing. Most of our certificated products sell to over 36 cities in Europe, North America, South America, Africa, etc. As a full-service valve supplier, we have 18 years manufacturing experience in producing various industrial valves. Our production workshop based in China is equipped to provide a professional custom valve service. See additional information at industrial valve company.
Float control valve is a modulating valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point. The float pilot is remotely installed Inside of reservoir, or Integrally installed with main valve for size less than 4 Inch. Our hydraulic float valve can stop overflow or overfilling while the valve connector connects the valve to the incoming liquid. When the float rises to a selected level, the float level control valve is then opened or closed by the lever attached to the float.
Proper maintenance and regular upkeep are essential for the effective functioning of altitude valves. By following a few simple steps, you can ensure that your valve operates smoothly and efficiently. Regular Inspection: Conduct regular inspections of the valve to check for any signs of wear and tear, leaks, or damage. Check the valve body, stem, and seat for corrosion, cracks, or other signs of deterioration. Lubrication: Keep the valve lubricated with suitable grease or oil to ensure smooth operation. Apply lubricant to the stem, bonnet, and other moving parts as needed. Cleaning: Clean the valve periodically to remove dirt, debris, and other contaminants that may affect its performance. Use a soft cloth or brush and mild detergent solution to clean the valve body and other components.
GV-Resilient seated gate valve is a soft seal disc which is fully encapsulated with rubber. The valve is designed with new technology for light operating, no clogging and no corrosion, good resilient memory & long service life. It can be used extensively in all kinds of water supply & sewage, fire-fighting and function as a shut-off or regulating valve. Features: Newly advanced design, less operation torgue & abrasion resistance; Body & Cover are made of high grade Ductile Iron; Disc is designed with an abrasion resistant nylon guide which can help less opening or closing torgue and smooth during operation; Forged stem provide stronger stem operation and less moving parts; Disc is covered by high-grade rubber which complies with drinking water; High-tech rubber curing with precise geometry dimensions, more resilient & strong adhesive to ductile casting; The 3 O-ring stem seals are designed to prevent stem leakage. and provide replacement of the O-ring without disassambling of valve from mainline pipes; Both inside & outside are coated with epoxy resin powder; Manufacturing standard meets BS EN 1074, BS 5163, BS EN 1171; F/F (Face to Face) meets the following standard: BS EN558-1. Find even more information at https://www.shsuotevalve.com/.
What are the Main Components of an Altitude Valve? Altitude valves are essential devices that help regulate the water level in storage tanks, ensuring a consistent and reliable water supply. To understand how altitude valves work, it’s important to familiarize yourself with their main components. The main components of an altitude valve include: Valve Body: This is the outer casing of the valve, which houses all the internal components and provides structural support. Float Assembly: The float assembly consists of a buoyant float connected to a rod or lever mechanism. As water levels rise or fall, the float moves accordingly, activating or deactivating the valve. Control Mechanism: The control mechanism is responsible for opening and closing the valve based on the position of the float assembly. It ensures that only enough water enters or leaves the tank to maintain a specific desired level. Pressure Differential Sensor: Some altitude valves also feature pressure differential sensors that detect changes in pressure between incoming and outgoing pipes. This helps optimize valve performance and prevent excessive flow rates.
The valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection; The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior; Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.